Getting started, 2010 zdx – Acura 2010 ZDX User Manual
Page 18
18
Navigation System
Getting Started
System Start-up
When you turn the ignition to ON (II), it
takes about 10 seconds for the
navigation system to boot up.
The first screen to appear is the
navigation system globe
screen. The
screen then changes to the
Disclaimer
screen:
NOTE:
Driver information will display on the
upper right side of the screen. If there
are any unread messages, the Message
icon will display on the bottom left side
of the screen. See page
System Language Selection
Move the
Interface Dial
to the right to
select
CHANGE LANGUAGE
. On the
Select a language
screen, you can
select the language to be used by the
entire system by choosing from the
language choices that are displayed.
After you have changed the language
settings, you will be returned to the
Disclaimer
screen.
Read this disclaimer carefully so you
understand it before continuing. Push in
on the
Interface Dial
to select
OK
, and
the
map
screen will appear on the
display. The “OK” cannot be activated
by voice.
If you do not push in on the
Interface
Dial
, the screen will go dark after 30
seconds. (You can also display the
Wallpaper
screen. See page
.) To
return to the
Disclaimer
screen, press
any navigation or voice control button.
2010 ZDX