AT&T 8403 - Manual (Page 8)

8 Issue 1 March 1996
8. Repeat Steps 5 through 7 if you want to program additional items on the
same list.
9. Go on-hook when you are finished. Start over with Step 1 if you want to
program items on a different personal list.
To place a call using a personal list item, do the following:
1. Go off hook.
■ You hear a dial tone.
2. Do one of the following:
a. Press , and then press the dial keypad number assigned
to a list feature access code.
b. Dial the desired AD personal list feature access code _____ (this
could be any of three feature access codes).
■ You hear a dial tone.
3. Dial the desired AD list item (1, 2, 3, and so on).
■ You hear a ringback tone.
Automatic Callback 0
The Automatic Callback feature allows you to automatically queue a recall to an
extension that is busy, does not answer, or returns a Call Waiting ringback tone.
When the queued extension becomes available, a callback is made to your
voice terminal.
NOTE:
An Automatic Callback request is automatically cancelled after 30 min-
utes.
Feature