AT&T 8403 - Manual (Page 24)

24 Issue 1 March 1996
To transfer the current call, do the following:
1. Press .
■ The call is placed on hold.
■ You hear a dial tone.
2. Dial the number to which the call is to be transferred.
■ You hear a ringback tone.
3. Remain on the line and announce the call; if there is no answer or the
line is busy, return to the held call by pressing the held call appearance
button.
4. Press again.
■ The call is transferred.
5. Go on-hook.
Volume Control 0
The volume control on your voice terminal can be adjusted to eight different vol-
ume levels for the ringer, the speaker, and the handset. This is done by press-
ing the
button when a call is ringing, when using the speaker, or when
using the handset. Pressing the right side of the button increases the
volume, and pressing the left side of the button decreases the volume.
Transfer
Transfer
Volume
Volume
Volume