American Fibertek MXR2-SM-FX-ST - Manual (Page 5)

5
D
C
I
N
5
V SPD 2 PWR
L
I
N
K
/
A
C
T
SPD 1 FX LINK
FIBER
RX
TX
2
1
2
1
Media Converter MXR2-MM-FX-SC
10/100BASE-TX To 100BASE-FX
american f ibert ek
MXR2 Series
MXR2 SERIES POWER SOURCE
Power to MXR2 series units is supplied by the subrack. Please refer to the MXRC-1 and MXRCPS-1
instructions for further details.
MXR2 SERIES POWER CONNECTION
Power is supplied to the MXR2 series units via a four finger backplane connector. The MXR2 series
units can be inserted into the subrack or removed from the subrack with power applied to the
backplane.
MXR2 SERIES FIBER DATA CONNECTIONS
The fiber optic connections are made via ST connectors located on the front of the unit. The TX port of
this unit is connected to the RX port of the corresponding unit.
MXR2 SERIES COPPER DATA CONNECTIONS
The UTP Ethernet input/output connections are made via RJ45 plugs on the front of the unit. A
maximum CAT5 wire length of 100 meters is permitted.