American Fibertek RR-94845SL Conversion Addendum - Manual (Page 2)

2
INSTALLATION AND OPERATION INSTRUCTIONS
INTRODUCTION
Thank you for purchasing your American Fibertek Series 94845SL conversion kit to modify your
94885SL singlemode forty-eight channel video multiplexer to include bi-directional Ethernet
data. Please take a few minutes to read these installation instructions in order to obtain the
maximum performance from this product.
FUNCTIONAL DESCRIPTION
The 94845SL Series units operate as a transmitter / receiver pair for the digital transmission of
forty-eight simultaneous NTSC or PAL video signals along with one channel of bi-directional
Ethernet data over one singlemode fiber optic cable. The Ethernet data channel in this
application will be connected on each end to an N-PORT-5630-8 multiplexer which will combine
eight RS485 data channels into one Ethernet channel for transmission over the fiber. An auto-
configure feature in the N-PORT-5630-8 will eliminate the need to modify the external switch
setting on the 45 series units that select MDI or MDIX connections.
RT-94845SL CONVERSION COMPONENTS
The RT-94845SL conversion requires the following components:
1) RTX-45-1490
2) PCSC/UPC-0.3
1) MTX-CWDM-8 1) BPS-1
1) N-PORT-5630-8 1) RJ45 / RJ45 cable ) RJ45 to RJ12 camera cables
RR-94845SL CONVERSION COMPONENTS
The RR-94845SL conversion requires the following components:
1)
RRX-45-1470 2) PCSC/UPC-0.3
1) MRX-CWDM-8 1) BPS-1
1) N-PORT-5630-8 1) RJ45 / RJ45 cable 8) RJ45 to RJ12 matrix cables
INSTALLATION
THIS INSTALLATION SHOULD BE MADE BY A QUALIFIED SERVICE PERSON AND
SHOULD CONFORM TO THE NATIONAL ELECTRICAL CODE, ANSI/NFPA 70 AND LOCAL
CODES.