Avital 740T User Manual

Page 12

2004 Directed Electronics, Inc.

Press

to disarm the security system when it is already armed.

If the power locks are controlled by the system, the doors will also

unlock. Disarming is confirmed when the parking lights flash twice

and the siren emits two chirps. The LED system status indicator will

also stop flashing. The siren chirping either four or five times when

disarming indicates Tamper Alert, which is described in the

Diagnostics section of this guide.

If your remote is lost or damaged, you can manually disarm your

vehicle security system. To disarm the system without a remote,

you must have the vehicle's ignition key and know where the

Valet® switch is located. Be sure to check with your installer at the

time of installation for the location of the Valet® switch.

To disarm the security system,

turn the ignition key on and

press the Valet® switch within

15 seconds. The system should

now disarm. If the system does not disarm, you may have waited

too long to press the Valet® switch; turn the ignition off and

repeat the process.

LLo

occaattiio

n o

off V

Vaalleett®

® SSw

wiittcch

DRW-35

Diissaarrm

miin

g W

Wiitth

utt aa R

Reem

ottee

AUX

Diissaarrm

miin