Part names and functions, Front panel of the drive – Apple IEEE1394 User Manual

Page 8

- 2 -

PART NAMES AND FUNCTIONS

Your external DVD-ROM may differ slightly from the figures shown, however the controls will

operate as described below.

Front Panel Of The Drive

1. Disc Ready/Read LED:

This LED is used to indicate the disc access status.

2. Eject

Button:

Press this button to open the disc tray. To close the disc tray, gently push the front of the tray.

3. Emergency

Eject:

In case you cannot supply power to the drive but want to remove a disc from the tray, push a small

rod (paperclip) about 5cm long, through the Emergency Eject hole to disengage the gears inside.

Then pull the tray out manually. After removing the disc, gently push the tray back to its original

position. This procedure is only to be used in the case of an emergency and is not meant for normal

operation.