Ameriphone JB-20 - Manual (Page 6)

CHAPTER 4
INSTALLATION
1. Pull the handset hook out
and reverse its position so
that the hook points up.
2. Install the Base Plate by
sliding the small tabs
into the upper slots. Push
on the bottom of the Base
Plate until it snaps into
place.
4
Desk Mounting
1. Plug in the long phone
cord.
2. Plug the handset cord
into the telephone.
3. Lift the handset and listen
for a dial tone.
4. Your DIALOGUE JB-20 is
ready to use.
Wall Mounting
Fig.3 - Connections and installation
Fig. 5 - Phone base installation
for wall mounting
MANUAL
AUTO
Fig. 4 - Reversing the hook