Ameriphone JB-20 - Manual (Page 10)

CHAPTER 5
(CONTINUED)
6. The number is now stored into
the number button you selected.
7. To change a stored number or
to program another memory
button, repeat this process from
step 1.
Memory Dialing
1. Lift the handset.
2. Press MEMORY and one of
the number buttons.
The number you have stored for
that button will be automatically
dialed.
8
Programming Frequently
Dialed Numbers
1. Lift the handset and press
the PROG button.
2. Enter the phone number as you
would normally dial it.
3. Press the PROG button again.
4. Press MEMORY, then one of
the number buttons: 0, 1, 2, 3,
etc.
Note:
#
and * keys are not
available for this function.
5. Hang up the handset.
Fig. 17 - Telephone keypad Fig. 18 - Memory button
Fig. 16 - Prog button