Airlink101 AWLC4030 User Manual

Page 3

Section 3

Configure the Cardbus Adapter

Note to Windows XP Users:

You must disable the Wireless Zero Configuration Utility in order to use the WLAN
Monitor. Please refer to the following steps to disable the Wireless Zero
Configuration Utility.

Step 1

Double-click on the Wireless Network Connection Icon in the system

tray, then click on Properties or Advanced.

Step 2

Go to the Wireless Networks tab, uncheck the “Use Windows to

configure my wireless network settings” check box and click OK. If the
Wireless Networks tab does not appear, skip this step.

Step 3

To open the cardbus adapter’s utility, double-click on the WLAN Monitor

Icon in the system tray.

The utility automatically adds an available wireless network to the Preferred
WLANs box. If no SSID is added, or if the SSID is wrong, please refer to the
following steps to join the appropriate wireless network. Otherwise skip to step 8.

Step 4

Select the SSID of the wireless network you wish to connect to from the

Available WLANs box and click Add.

Note: Be sure to remove the wrong SSID from the Preferred WLANs box before
adding any new SSID. You can remove the wrong SSID by selecting it and
clicking on Remove.