Resetting the deep fryer, Frying tips – GE 169094 User Manual
Page 6
- 6
8. Carefully place basket in fryer. Close lid. NOTE: Never allow oil in removable pot to go below
the minimum level indicated on the pot.
9. When frying is done, remove lid, raise basket and hook over removable oil pot to drain.
NOTE: When removing lid and while off–do not allow condensation to drain into oil pot.
10. Carefully empty food from basket and place in a bowl or colander lined with paper towel.
Fill and repeat as needed.
11.Set power switch to OFF and unplug appliance after use. WARNING : DO NOT USE THE
MAGNETIC END OF POWER CORD TO DISCONNECT THE FRYER. ALWAYS DISCONNECT THE
PLUG FROM THE WALL OUTLET FIRST. Use only model LM-132 cordset with this Fryer. Use of
any other cordset may cause fire, electric shock, or injury.
Resetting the Deep Fryer
In the event that the deep fryer is turned on without containing oil, the heating element will
heat up very rapidly. The deep fryer’s electrical unit will auotmatically shut down the heating
element if this occurs. After the unit has completely cooled, remove the electrical unit and
heating element and press the Reset button in the front side of the control panel. If this is not
done, the unit will not function.
Frying Tips!
The Ready to Cook Light may go out after frying a batch of food. When the oil has reached
the selected temperature, the Ready to Cook Light will come back on. The unit is now ready
to fry the next batch of food.