GE 169094 - Manual (Page 5)

- 5
DEEP FRYER MODEL
Model No. Rated voltage Rated power Capacity Dimensions Weight
169094 120V 1500W 3.0 L 41 x 21 x 24.5 cm 3.0 kg
OPERATING INSTRUCTIONS
Note : Before first use, Thoroughly clean and dry the fryer.
WARNING: Never operate fryer without oil in oil pot.
1. Place assembled fryer on stable, level, heat-resistant surface out of reach of children.
2. Lift the lid to open.
3. Remove the basket from the fryer.
4. Fill fryer with not less than 10 to not more than 12 cups of oil to top indicator mark on the
removable oil pot.
5. Attach magnetic end of cord assembly to fryer socket. This should be done prior to
plugging the cord into the wall outlet. The magnetic end of cord will only go in one way. Be
careful not to disturb the magnetic connection when plugging cord into electrical outlet.
NOTE: The magnetic force is relatively low to ensure that the cord will break away in
the event of being inadvertently pulled; thereby, preventing the deep fryer from being
pulled off a countertop. If it becomes disconnected. Turn the unit off, unplug the
cordset from the wall, reattach the cordset to the Fryer, plug the cordset into the wall
then proceed with operating unit.
6. Close lid. Set temperature control to desired setting. Set Power Switch to ON/I. Preheat the
fryer until the Read to Cook Light comes on (10 to 15minutes).
7. Place food in fryer basket. NOTE: Do not exceed maximum amount of food to be fried in
one batch.