GE 169146 - Manual (Page 6)

Client: Select Brands (Wal*Mart)
Project: 169146
Language: EN (US)
Date: 19.07.2007
Version: 08
Page: 6 (of 9 pages)
Barcode: 489 5012 10 000 5 00051
OPERATION
Before first use
• Unpack the rotating serving tray and remove all packaging material. Carefully
unpack the trays ( Assembly).
• Clean the trays, assembly bars and base unit ( Cleaning).
NOTE: Charge the battery before first use ( Charging instructions).
Assembly
Do not overtigthen the connection between the bars.
•
The rotating serving tray can be assembled in one way only. Do not try to assemble
it in a different sequence. The tray and/or the assembly parts may be damaged.
• Turn the tray lock (1) counterclockwise and remove the 3 trays (ill. a ). The tray lock
can be clipped into the place of the middle bar (6) for storage (ill. b ).
• Turn the base unit (15) upside down and remove the bars (4, 6, 8) and the handle (9)
from the bottom (ill. b ). Remove the plastic nut (2) from the lower bar (4).
• Fit the lower bar (4) with the 4 tabs into the -shaped opening of the lower tray (3)
(ill. c ).
• Turn the lower tray (3) with the bar upside down and use the plastic nut (2) to secure
the lower tray with the lower bar (4) (ill. d ).
• Place the lower tray (3) on a tabletop. Fit the middle tray (5) with the -shaped
opening onto the tabs of the lower bar (4) (ill. e ).
• Connect the middle bar (6) with the lower bar (4) (ill. f ).
• Fit the upper tray (7) with the -shaped opening onto the tabs of the middle
bar (6) (ill. g ).
• Connect the upper bar (8) with the middle bar (6) (ill. h ).
• Screw the handle (9) into the upper bar (8) (ill. i ).
• Place the lower tray (3) on the base unit (15). Fit the groove of the lower tray on the
guides (17) of the base unit. Make sure the lower bar (4) is securely joined with the
drive shaft (16) (ill. j ).
6