GE 20620 GE Universal Remote - Manual (Page 14)

14
Code Learning
The.learning.feature.lets.you.“learn”.functions.from.your.original.
remote.control..For.example.-.you.may.want.to.use.your.remote.to.
operate.the.RANDOM.PLAY.feature.from.your.original.CD.remote.
control..This.remote.is.equipped.with.an.“easy.learning”.feature.
that.lets.you.“learn”.features.(such.as.RANDOM.PLAY.from.your.
original.CD.remote).
Tips On Learning
You.can.only.learn.one.device.type.under.any.one.Mode.button.
e.g..only.learn.TV.codes.under.the.
TV Mode,.VCR.codes.under.the.
VCR Mode,.etc..If.you.are.trying.to.learn.from.a.“Universal”.remote,.
it.might.have.more.than.one.code.type.stored.under.a.Mode..Try.
learning.from.another.remote.to.see.if.there’s.a.problem.with.the.
type.or.brand.of.remote.you.are.trying.to.learn.from..
a. Some functions from some types of remotes might not be
able to be learned.
b. No functions may be stored under LEARN, BACKLIGHT, or
SETUP buttons.
c. Only one original device type can be learned per individual
Mode.
d. Use.fresh.batteries.for.both.the.Learning.Remote.and.the.
Original.Remote.
e. Keep.at.least.three.feet.away.from.incandescent.or.low-energy.
lights.when.learning.
f. Perform.a.Master.Clear.(see.page.18).before.learning.and.try.
learning.2.or.3.commands.initially..Then.carry.out.a.Master.
Clear.before.completely.learning.your.original.remote’s.
commands.
g. Point.your.existing.remote.at.the.bottom.of.the.learning.
Remote.so.the.IR.transmitter/sensor.on.both.remotes.are.
directly.in.line.with.each.other...You.may.need.to.adjust.the.
height.of.either.remote.to.achieve.this..Use.the.IR.Transmitter.
Finder.feature.to.assist.you.
h. Keep.the.distance.between.the.two.remotes.to.approximately.
1.inch.and.do.not.move.or.change.the.distance.between.the.
two.remotes.until.you.have.learned.all.the.required.buttons.for.
that.Mode.