Configuring the camera – Airlink101 AICN1500W User Manual

Page 7

Text mode
Original mode

Configuring the Camera

Step 3.1

Go to Start > (All) Programs > Airlink101 SkyIPCam UltraView >

SkyIPCam Utility.

Step 3.2

Click on Search to find the camera on your network. Select the

Camera you wish to configure and click on Link.

Note

If the Camera you wish to configure does not show up in the utility, make

sure the camera is properly connected to the same local network as your
computer is, and the Green LED should be on. Click on Search to try again.

Section 3