GE ZIK30GNDII - Manual (Page 16)

16
Preparation
Refrigerator
location
Do not install the refrigerator where
temperatures will be below 60°F (16°C) because
it will not maintain proper temperatures, and the
refrigerator couldl develop high internal
humidity. For proper installation, the refrigerator must
be placed on a level surface of hard material
the same height as the rest of the flooring.
This surface should be strong enough to
support a fully loaded refrigerator,
or approximately 1,200 lbs. each. See
the Installation Instructions for complete
directions.
Clearances
Allow 15" minimum clearance between the door
and wall for a full 115° door swing. Allow 5" min.
clearance to a wall for a 90° door swing for
Monogram Stainless Steel (European) models.
30" Bottom-Freezer
4” distance to Wall.