GE ZIK30GNDII - Manual (Page 4)

For answers to your Monogram, ® Cafe ™ Series,
Profile ™ Series or GE ® appliance questions, visit
our website at geappliances.com or call GE
Answer Center ® service, 800.626.2000.
110120 Specification Created 2/13
Listed by
Underwriters
Laboratories
ZIC30GNDII/ZIK30GNDII
GE Monogram ® 30" Fully Integrated Customizable Refrigerators for
Dual Installation
Dimensions and Installation Information (in inches)
3/4" CUSTOM PANEL DIMENSIONS:
3/4" CUSTOM PANEL DIMENSIONS:
80" High Fully Integrated Installation
If you choose to install custom panels, they must be cut to
the dimensions shown. The panels will attach to the door and
drawers using a hook and bracket system.
NOTE: This product is designed to handle 3/4" panels that are
made of wood.
33-3/8" x 23" is the maximum opening for a glass window.
The opening may be smaller if desired.
84" High Fully Integrated Installation
If you choose to install custom panels, they must be cut to
the dimensions shown. The panels will attach to the door and
drawers using a hook and bracket system. The top space
behind the top panel can be enclosed with wood and stained
by the cabinet maker to match adjacent cabinetry.
NOTE: This product is designed to handle 3/4" panels that are
made of wood.
33-3/8" x 23" is the maximum opening for a glass window.
The opening may be smaller if desired.
IMPORTANT NOTE: Maximum panel
weight:
A Fresh Food Door Panel: 33 lbs.
B Freezer Door Panel: 9 lbs.
C Convertible Food Door Panel: 19 lbs.
IMPORTANT NOTE: Maximum panel
weight:
A Fresh Food Door Panel: 33 lbs.
B Freezer Door Panel: 9 lbs.
C Convertible Food Door Panel: 19 lbs.
A
B
C
45-3/8”
7-1/2”
22-3/4”
29-3/4”
4”
3/4”
A
B
C
49-3/8”
22-23/32”
29-3/4”
7-17/32”
4”
45-3/8”
33-3/8”
29-3/4”
3-3/8” 3-3/8”
23”
6”
6”
49-3/8”
33-3/8”
29-3/4”
10”
6”
23”
3-3/8” 3-3/8”
PANELS FOR SOLID DOOR AND
DRAWERS
PANELS FOR SOLID DOOR AND
DRAWERS
*Styles must be a min 3-3/8" to cover aluminum door frame.
*Styles must be a min 3-3/8" to cover aluminum door frame.
Design Tip: Some amount of each panel will be visible on the
interior side of the unit. It is recommended that both sides of
each panel be finished.
Design Tip: If using custom panels, a custom toe kick should
be considered. The bottom of case is white.
Design Tip: Some amount of each panel will be visible on the
interior side of the unit. It is recommended that both sides of
each panel be finished.
Design Tip: If using custom panels,
a custom toe kick should be considered.
The bottom of case is white.
PANELS FOR GLASS DOOR
PANELS FOR GLASS DOOR
Note:
EXTREMELY IMPORTANT: Routing of custom wood panels
is required where the hooks and brackets attach to the
panel. Custom panels must be at least 3/4” thick where
the hooks and brackets hardware are attached.