GE ZIRP360NXLH - Manual (Page 17)

STEP 7 ADJUST DOOR SWING
NOTE: 7KLVUHIULJHUDWRUKDVDSRVLWLRQGRRUVWRS
When space does not allow the door to swing open
fully to 130°, you may change the door swing to a 90°
opening. Skip this step if door opening is satisfactory
for your installation situation.
STEP 8 INSTALL GRILLE PANEL
(TRIMMED MODELS ONLY)
‡5DLVHWKHDFFHVVSDQHOWRWKHVWRSSRVLWLRQ
‡2SHQWKHGRRUWRYLHZWKHERWWRPKLQJH1RWHWKHGRRU
VWRSSLQORFDWLRQV7KHSLQLVIDFWRU\LQVWDOOHGLQWKH
130° position.
‡&ORVHWKHGRRU)URPEHORZXVHSOLHUVWRXQVFUHZWKH
door stop and reinstall into the 90° position.
‡/RRVHQWKHVFUHZVRQWKHVLGHWULPEHKLQGWKHIUDPH
Remove the bottom trim.
‡6OLGHWKHSDQHORYHUWKHPHWDOEDNHUSDQHODQGLQWR
the trim.
‡,IQHFHVVDU\WDSZLWKDZRRGEORFNXQWLOWKHSDQHO
slips under the top trim piece.
‡5HDVVHPEOHWKHERWWRPWULP7LJKWHQWKHVFUHZV
‡$GMXVWWKHKLQJHVSULQJWRDFFRPPRGDWHWKHSDQHO
weight, if necessary.
Installation Instructions
17
Pin Location
For 90°
Door Swing
Pin Location
as Shipped
For 130°
Door Swing