30" pr ofessional ranges, 36" range cooktop configurations, Product dimensions and clearances – GE ZDP364NRPSS User Manual
Page 2: Backsplash accessories, Side view with a backsplash, 36" pr ofessional ranges 48" pr ofessional ranges
monogram.com
9
30"
pr
ofessional ranges
Advance planning for 36" dual-fuel Professional ranges
36" range cooktop configurations
The 36" Professional dual-fuel ranges offer a combination of
grill, griddle and burners on top, and a large self-clean, electric
European Reverse-Air convection and six-element heating
system oven.
Product dimensions and clearances
A 36" or wider HVI certified vent hood with 600 CFM minimum
is recommended. Models with a grill require a vent hood.
Backsplash accessories
The range requires a 12" minimum clearance to a vertical
combustible surface at the rear. A backsplash is required for
installations with less than 12" clearance. The following
backsplash accessories are available, or a custom,
non-combustible backsplash can be used.
Order ZX12B36PSS, 12" backsplash
Order ZXADJB36PSS, 30"–36" adjustable-height backsplash
with warming shelf
Side view with a backsplash
ZDP364NDPSS
with 4 burners and griddle
(Order ZDP364LDPSS for LP gas)
ZDP364NRPSS
with 4 burners and grill
(Order ZDP364LRPSS for LP gas)
ZDP366NPSS
with 6 burners
(Order ZDP366LPSS for LP gas)
The serial and model numbers are located behind the far
left knob for convenience. The full rating label is located
on the bottom of the control panel—visible when the oven
door is open.
Additional clearances
Installations without a hood require 48" minimum to combustibles.
A custom hood installation with exposed horizontal combustible
surfaces must have an “auto-on” feature. See hood installation
instructions for specific hood clearances.
The surface of the entire back wall above the range and below
the hood must be covered with a non-combustible material such
as metal, ceramic tile, brick or stone.
36"
pr
ofessional ranges
48"
pr
ofessional ranges
10-1/2”
1-1/2”
12”
28-1/4” to
Beveled
Edge of Control
Panel Bullnose
27-1/2” to
Beveled Edge
- Maximum
Adjacent
Cabinet Depth
for
Flush
Installation
13/16”
30-36”
3-3/16”
Control Panel
Depth
28-1/4”
to Front of
Door
48-1/4”
with Oven Door
Open
31-1/16”
to Front of
Handle
35-1/4”
to
36-3/4”
7” Control
Panel Height
28-7/8”
to Front
Edge
Optional
Backsplash
Accessories