GE ZDT870SIFII - Manual (Page 18)

18
The 3rd rack is the recommended location for
silverware and has 2 trays:
The utensil tray holds serving spoons, chop sticks,
spatulas, cutlery, whisks, etc. Be sure not to overlap
the utensil heads.
The silverware tray holds silverware individually in
slots and is positioned by alternating the heads of the
silverware.
These trays may be removed to allow for easier loading
and unloading, changing the side that the trays are on,
or to create extra space for the upper rack.
To remove a tray, fully extended the 3rd rack, grasp
both the front and back handles on one tray and gently
lift the tray out of the rack. To replace the tray, grasp
both handles and gently place it on the rack so that the
deepest part is towards the center of the rack.
CAUTION!
Take care when loading,
unloading, or transporting the silverware or
utensil trays. The trays may contain sharp or
heavy items. If items are dropped from the trays
or the trays are dropped, injury could occur.
IMPORTANT NOTES:
„ Do not place cutlery of different materials next to
each other in the 3rd rack. Doing show may cause
discoloration of the cutlery.
„ The trays are only meant to be used with a GE
3rd rack dishwasher to hold silverware, cooking
utensils, and other small items. Using the trays for
any other purpose could result in damage to the
trays or damage to anything interacting with the
trays.
„ Ensure that the 3rd rack is fully closed before
shutting the dishwasher door. Shutting the door
with the rack partially extended could cause
damage to the dishwasher.
8 Place Settings - Model: ZDT870 10 Place Settings - Model: ZDT870 12 Place Settings - Model: ZDT870
For best dishwashing results, follow these loading guidelines. Features and appearance of racks and silverware
baskets may vary from your model.
Loading the Dishwasher
Dishwasher
3rd Rack
(on some
models)
*See Silverware Basket section
on how to load silverware
Utensil Tray
Silverware
Tray