GE ZEK938SMSS - Manual (Page 2)

18 18
Advance planning for electronic convection wall ovens
Electrical requirements
Product rating is 208 or 240V, 60Hz. Connect to a 40-amp circuit
for double ovens and 20-amp circuit for single ovens. The ovens
must be connected to a supply circuit of the proper voltage and
frequency and protected by a time-delay fuse or circuit breaker.
Cutout and product dimensions
27-1/4" Min.
27-5/16" Max.
28-1/2" Min.
28-5/8" Max.
23-1/2"
32-1/2"
Recommended
Locate Junction Box 22"
Above Cutout Floor, Within 5"
of Right Rear Wall
605Dia92
30"
23-1/4"
28-1/4"
29-3/4"
Recessed
Depth*
*24-1/4" to front of door
26-3/16" including handle
28-1/2" Min.
28-5/8" Max.
51-13/16"
Min.
51-15/16"
Max.
23-1/2"
12"
Locate Junction Box 47"
Above Cutout Floor, Within 5"
of Right Rear Wall
605Dia91
30"
52-7/8"
23-1/4" 29-3/4"
Recessed
Depth*
*24-1/4" to front of door
26-3/16" including handle
23-1/2"
Min.
27"
32-1/2"
Recommended
Locate Electrical Outlet Within 10"
of Left Side of Opening 22" Above
Cutout Floor or 5" Below Cutout Floor
605Dia94
25" Min.
25-1/4" Max. 27-5/8" Min.
28-1/8" Max.
29"
26-5/8" 23-1/4"
Recessed
Depth* *24-1/4" to front of door
26-3/16" including handle
30" single ovens
ZET938SMSS Stainless steel
30" double ovens
ZET958SMSS Stainless steel
27" single ovens
ZEK938SMSS Stainless steel
13-1/4"
27"
23-1/2" 10"
49-11/16"
Min.
50-1/8"
Max.
Locate Electrical Outlet Within 10"
of Left Side of Opening and 44" Above
Cutout Floor or 5" Below Cutout Floor
605Dia93
25" Min.
25-1/4" Max. 51"
26-5/8" 23-1/4"
*24-1/4" to front of door
26-3/16" including handle
Recessed
Depth* 27" double ovens
ZEK958SMSS Stainless steel
30" single oven
side-by-side installations
Install two ovens in separate cutouts. Allow 2" minimum
between the cutouts.
2
"(5.1 cm)
Min.
Cutout
–
Observe all
dimensions
and
requirements.
Cutout
–
Observe all
dimensions
and
requirements.