GE PP932SMSS User Manual
Pp932sm, Ge profile, Series 30" built-in cleandesign electric cooktop
Dimensions and Installation Information (in inches)
PP932SM
GE Profile
™
Series 30" Built-In CleanDesign Electric Cooktop
For answers to your Monogram
®
or GE
®
appliance
questions, visit our website at geappliances.com
or call GE Answer Center
®
service, 800.626.2000.
220574
Listed by
Underwriters
Laboratories
†
Note: Check local codes for required breaker size
Important: Requires a 5" free area between
the bottom of the cooktop to any combustible
material, i.e., shelving. Free area not required
when installing wall oven underneath cooktop.
Refer to installation instructions. Requires a
15" minimum from cooktop to adjacent
overhead cabinets. Units are furnished with
a 48" flexible armored cable.
Note: 30" Ribbon cooktops are approved for use over select GE 27"
and GE 30" Single Wall Ovens and Warming Drawers. Refer to cooktop and
wall oven/warming drawer installation instructions packed with product
for current -dimensional data. If installed with a GE Profile
™
Telescopic
Downdraft System, consult both the cooktop and downdraft installation
instructions packed with product before installing. Cooktop gas/electric
supply may need to be re-routed to install downdraft. Consult cabinet and
countertop manufacturer’s specs for flush mount installation prior to
install.
Before installing, consult installation instructions packed with
product for current dimensional data.
Filler Trim Kit: When replacing an old GE 30" cooktop (with larger opening)
use the following one-piece trim kit to fill in the over-size hole. Available at
additional cost. JXTR32W (True White) JXTR32B (Black glass) JXTR32C (True
Bisque)
KW Rating
240V
8.6
208V
6.5
Breaker Size
240V
40 Amps
†
208V
40 Amps
†
Specification Revised 3/13