Adjust the exhaust adaptor, Connecting ductwork, Installation instructions – GE JVM6175DFWW User Manual
Page 14: Adjust the exhaust adaptor a5, Mount the microwave oven (cont.) a4
14
4 Attach the microwave oven to the top cabinet.
8
7
6
Cabinet Front
Cabinet Bottom Shelf
Tighten the outer two screws to the top of the
microwave oven. (While tightening screws, hold
the microwave oven in place against the wall and
the top cabinet.)
Filler Block
Microwave Oven Top
Equivalent
to Depth
of Cabinet
Recess
Insert 2 self-aligning screws
through outer top cabinet
holes. Turn two full turns on
each screw.
Tighten center
screw completely.
Install grease filter. See the Owner’s Manual
packed with the microwave.
Installation Instructions
ADJUST THE EXHAUST
ADAPTOR
A5.
Open the top cabinet and adjust the exhaust adaptor
to connect to the house duct.
Back of
Microwave
Oven
For Side-to-Side Adjustment,
Slide the Exhaust Adaptor
as Needed
Damper
CONNECTING DUCTWORK
1
2
Extend the house duct down to connect to
the exhaust adaptor.
Seal exhaust duct joints using duct tape.
A6.
House Duct
Self-Aligning Screw
5
MOUNT THE MICROWAVE
OVEN (cont.)
A4.
- JVM6172SFSS JVM6175EFES JVM6172DFWW JVM6175RFSS JVM6172DFBB JVM6175DFBB JVM6172RFSS JVM6175SFSS 30 Inch Over-the-Range Microwave Installation Instructions Profile 2.1 cu. ft. Over-the-Range Microwave Installation Manual 1.9 cu. ft. Over-the-Range Microwave Installation Guide 1.7 cu. ft. Over-the-Range Microwave Installation Guide 1.6 cu. ft. Over-the-Range Microwave Oven Installation Manual 30 Inch Over-The-Range 1,000 Watt Microwave Installation Guide