GE AJCQ08ACF - Manual (Page 6)

On
Cool
Timer Temp
Off
On
Mode
Power
On/Off Off Fan
Fan
Hi
Heat
Low
Air Conditioner Controls
ON/OFF
Turns air conditioner on and off.
Display
Displays the temperature setting. Displays
hours when setting the timer.
MODE
On the air conditioner controls, use to set
COOL, HEAT or FAN mode. Indicator lights
on the air conditioner controls will show the
mode selected.
TEMP Increase + /Decrease – Pads
Use to set temperature when in COOL
or HEAT mode.
FAN Speeds
Use to set the fan speed at LOW or HIGH.
Indicator lights will show the speed selected.
TIMER
21³When the air conditioner is off, it
can be set to automatically turn on in
half an hour to 24 hours at its previous
setting.
Each touch will set the time in half hours
up to 10 and then in hours up to 24.
To cancel the On Timer, press the ON
pad until “CL” appears. Then wait until
the display turns off.
2))³When the air conditioner is on, it
can be set to automatically turn off in
half an hour to 24 hours. Each touch will
set the time in half hours up to 10 and
then in hours up to 24.
To cancel the Off Timer, press the OFF
pad until “CL” appears and wait for the
set temperature to be displayed. The unit
will now resume normal operation.
Remote Control Signal Receiver
NOTE: When the air conditioner is turned on,
it will automatically start in the setting last used .
„ To ensure proper operation, aim the
remote control at the signal receiver
on the air conditioner.
„ The remote control signal has a range
of up to 21 feet.
„ Make sure nothing is between the air conditioner
and the remote control that could block the
signal.
„ Make sure batteries are fresh and installed
FRUUHFWO\³VHHWKH&DUHDQG&OHDQLQJVHFWLRQ
Remote Control
$ERXWWKHFRQWUROVRQWKHDLUFRQGLWLRQHU³+HDW&RRO0RGHOV
Appearance may vary.
Remote Control
Lights beside the touch pads on the air conditioner
control panel indicate the selected settings.
Controls
6