Avanti W798SS-1 - Manual (Page 14)

14
SPIN ONLY
• Press down the power button.
• Press the wash button until all wash indicators are OFF.
• Press the rinse button until all rinse indicators are OFF.
• Press the spin button to select the spin time.
• Press the START/HOLD to start the course. And the LED display will show the remaining time of
the entire course.
FUNCTIONS
Each wash set is programmed in the computer; see the details in the wash program chart.
Press down each button within 5 minutes since the program will reset the process group. Then press
down STRAT/HOLD button to re-start the washing machine. If not, the washing machine will shut
down automatically.
Close the lid, or the washing machine will not operate.
In case the unbalance of load triggers the safety switch when spinning, the washing machine will
automatically refill water to adjust the balance.
Note:
• Clothes easily discolored should be washed separately so as to prevent inter-dyeing.
• If you want to change a selected program, please press the START/HOLD button first, then press
the Program button before pushing START/HOLD button.
• When Rinse & Drain program is ON, do not use detergent.
• If you want to drain water during washing, press the START/HOLD button, then select Rinse and
Drain program. Press START/HOLD button again to restart.
Select this course when you have to go out or do something else.
DELAY START SETTING
• Press down the power button.
• Load the washing machine and select the appropriate wash program.
• Press PRESET button continuously to select the delay start time. (From 1 hour to 24 hours)
• Close the lid completely.
• Press START/HOLD button to start the course.
Select the function, the program will hold the washing machine and give out alert voice once the lid is
opened when washing. And the washing machine will automatically drain water and give alarm if the
lid is not closed in 10 seconds. In case a child falls into the washing machine when he plays around,
he will be in safe status.
CHILDREN-PROOF SETTING
• Press down the power button.
• Select the appropriate program and press START/HOLD button to start the washing machine.
• The washing machine buzzer will give out music and the digital indicator show
FUNCTION
. This time you
must decide whether to select the function or not.
SOAK WASH RINSE SPIN TOTAL TIME
(Approx.)
NORMAL 12 Min. 1 Cycle 5 Min. 35 Min.
SOAK 20 Min. 12 Min. 2 Cycles 5 Min. 66 Min.
SPEEDY 6 Min. Spray Rinse + 1 Cycle 3 Min. 33 Min.
JEANS 12 Min. Spray Rinse + 2 Cycles 5 Min. 52 Min.
GENTLE 12 Min. 2 Cycles 3 Min. 44 Min.
HEAVY 12 Min. Spray Rinse + 2 Cycles 5 Min. 58 Min.
DELICATES 6 Min. 2 Cycles 3 Min. 38 Min.
SPRAY RINSE 12 Min. Spray Rinse + 2 Cycles 5 Min. 58 Min.