Alliance Laundry Systems SW039 - Manual (Page 10)

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Installation/Operation Supplement
9001014 8
General Specifications
Model 18 25 35
Drive Train Information
Number of motors in drive train 1 1 1
Drive motor power 0.75 kW (1 hp) 0.75 kW (1 hp) 1.5 kW (2 hp)
Cylinder Speeds
Wash/reverse speed 10-50 rpm 10-50 rpm 10-50 rpm
Distribution/drain speed 82 rpm 82 rpm 74 rpm
Extract speed 250-1000 rpm 250-1000 rpm 250-1000 rpm
Centrifugal Force Data
Wash/reverse centrifugal force 0.03-0.74 Gs 0.03-0.74 Gs 0.04-0.91 Gs
Extract centrifugal force 19-296 Gs 19-296 Gs 23-363 Gs
Balance Detection
Vibration safety switch installed Standard Standard Standard
Direct Steam Heating (Optional)
Steam inlet connection size 10 mm (0.38 in.) 10 mm (0.38 in.) 10 mm (0.38 in.)
Number of steam inlets 1 1 1
Steam required to raise
bath temperature 10°C, kg (10
°F, lb.)
LOW 0.83 kg (1.15 lb.) 1.15 kg (1.6 lb.) 1.6 kg (2.22 lb.)
HIGH 0.94 kg (1.3 lb.) 1.3 kg (1.8 lb.) 1.8 kg (2.52 lb.)
Average steam use per cycle 7.6 kg (0.48 bhp) 9.5 kg (0.60 bhp) 16.5 kg (1.05 bhp)
Electrical Heating (Optional)
Total electrical heating capacity 9 kW 9 kW 18 kW
Electrical heating elements 3 3 6
Electrical heat element size 3 kW 3 kW 3 kW
Time required to raise bath temperature LOW 10°C 3 minutes 5 minutes 5 minutes
50°F 6 minutes 8 minutes 8 minutes
MED 10°C 4 minutes 6 minutes 6 minutes
50°F 7 minutes 9 minutes 9 minutes