Acnodes Aficio AP4510 - Manual (Page 42)

Configuring the Printer for the Network
32
3
DDDD
Press
{{{{U U U U}}}} or {{{{T T T T}}}} to display “Net-
work Setup”.
EEEE
Press
{{{{Enter #}}}}.
The following message appears on
the panel display.
FFFF
Select the protocol you want to
use.
Note
❒ Do not select protocols that are
not used on your network.
A Press {{{{U U U U}}}} or {{{{T T T T}}}} to display
“Active Protocol”.
B Press {{{{Enter #}}}}.
The current setting appears on
the panel display.
C Set other protocols you need to
set in the same way.
Note
❒ Leave unused protocols "Not
Active".
GGGG
If you use TCP/IP, you should as-
sign the IP address to the printer.
Note
❒ To get the IP address for the
printer, contact your network
administrator.
A Press {{{{U U U U}}}} or {{{{T T T T}}}} until the fol-
lowing message appears.
B Press {{{{Enter #}}}}.
The current IP address appears
on the panel display.
C Press {{{{U UU U}}}} or {{{{T TT T}}}} to enter the left
most entry field of the IP address.
D Press {{{{Enter #}}}}.
The pointer (
k) moves to the
next entry field automatically.
Note
❒ You can return the pointer
(
k) to the previous (left) entry
field by pressing
{{{{Escape}}}}.
❒ If you press {{{{Escape}}}} when
the pointer (
k) is on the left-
most position, the selected IP
address is reset.
E Repeat steps C C C C and D D D D to enter
the IP address.
Check if the pointer (
k) is at the
rightmost position, and press
{{{{Enter #}}}} to register the IP ad-
dress you selected.
Host Interface:
Network Setup
Network Setup:
IP Address
Network Setup:
Active Protocol
Active Protocol:
TCP/IP
Network Setup:
IP Address
IP Address:
011.022.033.044
IP Address:
192.022.033.044
IP Address:
192.02
k.033.044
IP Address:
192.168.000.011
Network Setup:
IP Address
Setup-F3_FM.book Page 32 Friday, October 5, 2001 8:27 PM