HP Elite L2201x 21.5-inch LED Backlit LCD Monitor - Manual (Page 21)

Table B-1 L2201x Specifications (continued)
Measured Power Consumption:
Full Power
Typical Settings
Sleep
Switch Off
28 watts
26.4 watts
1 watt
1 watt
Input Terminal One DisplayPort connector (cable
included)
Energy Saver Feature
The monitors support a reduced power state. The reduced power state will be entered into if the
monitor detects the absence of either the horizontal sync signal and/or the vertical sync signal. Upon
detecting the absence of these signals, the monitor screen is blanked, the backlight is turned off, and
the power light is turned amber. There is a brief warm up period before the monitor will return to its
normal operating mode.
Refer to the computer manual for instructions on setting energy saver features (sometimes called
power management features).
NOTE: The above power saver feature only works when connected to computers that have energy
saver features.
By selecting the settings in the monitor's Energy Saver utility, you can also program the monitor to
enter into the reduced power state at a predetermined time. When the monitor's Energy Saver utility
causes the monitor to enter the reduced power state, the power light blinks amber.
ENWW Energy Saver Feature 15