HP ProLiant MicroServer - Manual (Page 27)

Hardware options installation 27
c. Lock the holding clicks to secure the memory module in place.
7. Close the panel door.
8. Use the HP ProLiant MicroServer key to lock the panel door.
HP Trusted Platform Module option
For more information about product features, specifications, options, configurations, and compatibility, see
the product QuickSpecs on the HP Product Bulletin website (
http://www.hp.com/go/productbulletin ).
Use these instructions to install and enable a TPM on a supported server. This procedure includes three
sections:
1. Installing the Trusted Platform Module board (on page 28 ).
2. Retaining the recovery key/password (on page 29 ).
3. Enabling the Trusted Platform Module (on page 30 ).
Enabling the TPM requires accessing RBSU (" ROM-Based Setup Utility " on page 31 ). For more
information about RBSU, see the HP website ( http://www.hp.com/go/ilomgmtengine/docs ).
TPM installation requires the use of drive encryption technology, such as the Microsoft Windows BitLocker
Drive Encryption feature. For more information on BitLocker, see the Microsoft website
( http://www.microsoft.com ).
CAUTION: Always observe the guidelines in this document. Failure to follow these guidelines
can cause hardware damage or halt data access.
When installing or replacing a TPM, observe the following guidelines: