HP x2401 24-inch LED Backlit Monitor - Manual (Page 23)

Table A-2 Factory Preset Modes (continued)
Preset Pixel Format Horz Freq (kHz) Vert Freq (Hz)
15 1680 Ч 1050 65.29 59.954
16 1920 Ч 1080 67.50 60.00
Energy-saver Feature
The monitors support a reduced power state. The reduced power state will be entered into if the
monitor detects the absence of either the horizontal sync signal and/or the vertical sync signal. Upon
detecting the absence of these signals, the monitor screen is blanked, the backlight is turned off, and
the power light is turned amber. When the monitor is in the reduced power state, the monitor will utilize
0.5 watts of power. There is a brief warmup period before the monitor will return to its normal
operating mode.
Refer to the computer manual for instructions on setting energy-saver features (sometimes called power-
management features).
NOTE: The above power-saver feature only works when connected to computers that have energy-
saver features.
By selecting the settings in the monitor's Energy Saver utility, you can also program the monitor to enter
into the reduced power state at a predetermined time. When the monitor's Energy Saver utility causes
the monitor to enter the reduced power state, the power light blinks amber.
Energy-saver Feature 17