HP x2401 24-inch LED Backlit Monitor - Manual (Page 10)

Connecting the Cables
1. Place the monitor in a convenient, well-ventilated location near the computer.
Figure 2-3 Connecting the monitor
2. Connect one end of the DisplayPort signal cable (provided with select models) to the DisplayPort
connector on the side of the monitor and the other end to the DisplayPort connector on the
computer.
3. Connect one end of the HDMI signal cable (provided with select models) to the HDMI connector
on the side of the monitor and the other end to the HDMI connector on the computer.
4. Connect the power adapter cord to the power connector on the side of the monitor. Connect one
end of the power cord to the power supply brick and the other end to an electrical wall outlet.
WARNING! To reduce the risk of electric shock or damage to the equipment:
Do not disable the power cord grounding plug. The grounding plug is an important safety feature.
Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all times.
Disconnect power from the equipment by unplugging the power cord from the electrical outlet.
For your safety, do not place anything on power cords or cables. Arrange them so that no one may
accidentally step on or trip over them. Do not pull on a cord or cable. When unplugging from the
electrical outlet, grasp the cord by the plug.
4 Chapter 2 Setting Up the Monitor