A&D FX-i SERIES - Manual (Page 34)

32
Class Item and Parameter Description
0 Key mode
Accepts the PRINT key only when
the display is stable.
1
Auto print mode A
(Reference = zero)
2
Auto print mode B
(Reference = last stable value)
Outputs data when the display is
stable and conditions of
ap-p, ap-b
and the reference value are met.
3 Stream mode Outputs data continuously.
4 Key mode B (Immediately)
Accepts the PRINT key regardless
of the display condition.
5 Key mode C (When stable)
Accepts the PRINT key immediately
when the display is stable, or waits
for the display to be stable when not.
prt
Data output mode
6 Interval output mode Uses interval output mode.
0 Plus only Displayed value>Reference
1 Minus only Displayed value
ap-p
Auto print polarity
2 Both Regardless of displayed value
0 10 digits
1 100 digits
ap-b
Auto print difference
2 1000 digits
Difference between reference value
and displayed value
0 Every measurement
1 2 seconds
2 5 seconds
3 10 seconds
4 30 seconds
5
1 minute
6 2 minute
7 5 minute
int
Interval time
8 10 minute
Interval time for the interval output
mode
(With
prt 6)
0 No pause pU5e
Data output pause 1 Pause (1.6 seconds)
Selects the data output interval.
0 Not used at-f
Auto feed 1 Used
Selects whether or not automatic
feed is performed.
0 No output
1 AD-8121 format
info
GLP output
2 General data format
Selects GLP output method.
0 Not used
dout
Data output
ar-d
Zero after output 1 Used
Adjusts zero automatically after data
is output
Factory settings. Digit is a unit of minimum weighing value