HP Integrity rx5670 Server - Manual (Page 20)

SetLACState Utility
Overview
Chapter 3 20
Overview
If a server contains more than one server adapter and at least one of those adapters is
not connected, the server may display as failed on some network management consoles,
and SNMP traps may also be triggered. Use the SetLACState utility (
SetLACState ) to
disable the Local Area Connection containing the unused adapter. This stops the server
from displaying as failed and prevents the SNMP traps also.
NOTE The server adapter identified by the Local Area Connection must be an HP-supported
adapter. Also, this utility cannot be used to enable or disable adapter teams.
The SetLACState utility is installed as part of the Network Configuration Utility (NCU)
component package for Windows Server 2003. Upon installation,
SetLACState.exe is
copied into the %SystemRoot%\System32\ directory.