HP ProLiant DL980 G7 Server - Manual (Page 77)

Figure 68 (page 77) shows an example of such a PowerShell script.
NOTE: HPSUM versions later than 5.3.5.0 are not supported.
Figure 68 PowerShell script for initiating software discovery
You can run the software discovery PowerShell script even if the HP ESO service is stopped. Before
running the script, open and edit the script in PowerShell ISE:
1.
Launch PowerShell ISE
2. Open the ESO_Recommendations_Software_Discovery.ps1 file in PowerShell ISE.
3. Click the Run button in the tools bar of the PowerShell ISE or press the F5 shortcut key.
4. In the output console of PowerShell ISE, specify the directory containing the HPSUM component
(hpsum.exe) and press Enter on your keyboard. The software discovery results (whether
settings succeeded or failed) are shown in the output console. Components that need updates
are listed in red typeface, while components that are up to date are listed in green.
Using a PowerShell script to apply all recommended optimization values of settable parameters and to initialize software
discovery
77