HP vs17x 17 inch LCD Monitor - Manual (Page 32)

Setting Up the Monitor
3–12 User’s Guide
3. Holding the pedestal-base assembly so it cannot fall, remove
the four screws 2. Use a Phillips-head screwdriver. Lift the
assembly 3 and set it aside.
4. Save the removed items (screws, back cover, and
pedestal-base assembly) for future use.
5. Mount the f monitor to a swing arm or other mounting fixture.
The four threaded mounting holes on the monitor panel are
spaced 100 mm apart and are compliant with the VESA
standard for mounting flat-panel monitors.
Use the four holes to attach a swing arm or other mounting
fixture. Follow the instructions included with the mounting
fixture, to ensure that the monitor is safely attached.
6. Assemble the speakers. Refer to “Assembling the f Monitor
Satellite Speakers” in this chapter.
To reinstall the desktop pedestal-base assembly for the f monitor:
1. Remove the mounting fixture.
2. Reverse the preceding instructions to attach the pedestal-base
assembly onto the panel (be sure to insert the top two screws
first), and then replace the rectangular back cover and snap it
into place on the monitor.