HP ProLiant DL380p Gen8 Server - Manual (Page 4)

For information about creating QR codes, see “Creating a QR code” (page 4) .
To add an iLO system:
1. Tap on the Select iLO page.
2. Enter following information:
•
iLO DNS name or IP address
•
Login name
•
Password
TIP: You can enter this information manually, or you can tap Scan to scan a QR code.
3. Tap Yes to save the login credentials.
Login credentials are saved only if the connection to iLO is successful.
4. Tap Yes to add this iLO to the Favorites list.
5. Tap Done.
The iLO is displayed in the list using the DNS name or IP address you entered. After a successful
connection is made, the iLO server description is displayed below the DNS name or IP address.
Creating a QR code
Use the following procedure to create a QR code.
1.
Do an Internet search for a QR code generator.
2. Set the code type to text.
3. Enter the iLO network address, login name, and password in the following format:
network_address;login_name;password.
4. Follow the on-screen instructions to save the QR code.
4 Adding iLOs