Asda DVD1072UK - Manual (Page 14)

13
OPERATION
MUTE
Press MUTE button during play, the player shows and there is no audio output (silence),
Press again to cancel MUTE.
VOL+/VOL-
Press VOL+/VOL- button play may change volume for audio output.
RETURN
For VCD when playing 2.0 PBC is operating. Press RETURN key, it will return to menu mode.
DISPLAY
Press DISPLAY button during play to show the disc s relevant information on TV screen(such as
playing time, chapter number, playback status).
ZOOM
Zoom function can only be operated in JPEG disc and VCD/DVD format disc. By pressing zoom
button
When playing JPEG disc, there 5 levels of zoom available(150%, 200%, 25%, 50%, 100%)
when playing DVD/VCD discs, there are 3 levels of zoom available (ZOOMx2, ZOOMx4,
ZOOMx1).
Note: Zoom function is not working on PAL system DVDs.
MP3 does not have this function
A-B REPEAT
Press A-B button during playback at the point where repeat play is to commence (a) then press again
at the point where repeat play is to be concluded (B). Repeat playback between point (A) and point (b)
starts. Press A-B button once more where TV screen appears REP OFF to return to normal play.
REPEAT
Press the repeat key to choose repeat play chapter or title (DVD) and play single audio or full disc
(VCD, CD, MP3).
Note: Some VCD do not have repeat function with PBC ON state.
DVD PLAYER
PBC function (only VCD)
When playing VCD 2.0 press PBC button to display title menu use number key choice and ENTER
button to play music.
ANGLE
Press ANGLE continuously during playback DVD disc to toggle the disc between available angles
recorded on the disc if the disc has multi-angle function.
When playing DVD/MP3/JPG discs. Press RETURN key, it will return to menu mode.
LANGUAGE
Press LANGUAGE button during playback to toggle between available audio language recorded on
the disc if the disc has this multi-language.
Press LANGUAGE button could toggle available audio language soundtracks. Note:
PROGRAM
Press PROG button, the program playback screen appears on the TV monitor, 20 tracks
or chapters can be programmed. Use
button on the remote control to select your
preferred track (CD/VCD) or title and chapter (DVD), then press ENTER button to confirm.
Use CLEAR button to amend false or unsatisfied settings. You can only press the PLAY button on
the remote control to start playing after you finish the program setting. Press the PROG button
directly to return to normal play mode. In this case, the program is not confirmed.
. “ : SELECT : PLAY ” shown on screen is only used for indication, no function for cursor
Helpline number: 0845 300 7775