Actiontec electronic GS204AD9-01 - Manual (Page 46)

43
Chapter 5 Advanced Setup
64-bit WEP
64-bit WEP requires four separate keys. Each key comprises five hexadecimal
digit pairs. A hexadecimal digit consists of an alphanumeric character ranging
from 0-9 or A-F. An example of a 64-bit
WEP key is: 4E-A3-3D-68-72. To create
a set of 64-bit WEP keys, enter five hexadecimal digit pairs in each Key text box
(Key 1, Key 2, Key 3, Key 4). After activating 64-bit WEP on the Gateway, a
computer with wireless capability can join the network only if these same keys
are entered in the computer’s wireless encryption scheme.
128-bit WEP
128-bit WEP requires one key of 13 hexadecimal pairs. A hexadecimal digit con-
sists of alphanumeric characters ranging from 0-9 or A-F. An example of a 128-bit
WEP key is: 3D-44-FE-6C-A1-EF-2E-D3-C4-21-74-5D-B1. To create a 128-bit
WEP key, enter 13 hexadecimal digit pairs in the Key text box. After activating 128-
bit WEP on the Gateway, a computer with wireless capability can join the network
only if this key is entered in the computer’s wireless encryption scheme.
☞
Note: Not all wireless PC Cards support 128-bit WEP . Ensure
that all PC Cards installed in the networked computers support
128-bit WEP before activating.