Audiovox P-87S - Manual (Page 3)

OPERATING INSTRUCTIONS
-1-
1
ON-OFF POWER BUTTON (PWR)
VOLUME LEVEL MEMORY
Press this button momentarily to turn the unit on or off. The unit
will also turn on automatically when a cassette is inserted if the
ignition switch is “on”.
This button is also used to set the memory for the volume level
which will be recalled when the unit is turned on. To set the
volume memory, turn the unit on and adjust the volume using the
Volume Control
2
to the level which you wish to be recalled when
the unit is turned on. Then, press the On-Off button and hold it for
approximately 2 seconds. The unit will turn off and the selected
volume level is now set in the memory. If the unit is turned off with
the volume higher than the memory setting, the unit will return to
the memory setting when turned back on. If, however, the unit is
turned off with the volume lower than the memory setting, the unit
will return to the lower setting when turned back on.
2
VOLUME LEVEL CONTROL
To increase the volume level, press the + side of the button. The
volume will increase and the level will be shown on the display
panel from a minimum of 0 to a maximum of 80. To increase the
volume quickly, keep the button pressed. To decrease the
volume level, press the – side of the button. Keep the button