Nilfisk-ALTO C 120.4 User Manual

Page 6

4.2 Mounting of spray

lance and Click & Clean
nozzles

Note: The
spray lance (6)
has a built-in low

pressure nozzle that can be
used for fl ushing away dirt.

2. Attach the nozzle.

Warning: When

attaching the Click

& Clean nozzles,
the pawl on the

side of the spray

lance should come out again.

Note: The Tor-
nado

PR noz-

zle and the foam

sprayer feature a swivel lock,
which must be positioned in the
hole in the Click & Clean spray
lance.

Press the pawl to detach the
Click & Clean nozzle.

1. Push the spray lance (6) into

the spray gun (7) and screw
it on.

4.3 Water connection

An ordinary 1/2" garden hose of
min. 10 m and max. 25 m will
be suitable.

NOTE: Connec-
tion to the public
mains according
to regulations.

IMPORTANT!
Only use water
without any

impurities. If there is a risk
of running sands in the inlet
water (i.e. from your own well),
an additional fi lter should be
mounted.

1. Let the water run through the

water hose before connecting
it to the machine to prevent
sand and dirt from penetrat-
ing the machine.

Note: Check that the fi lter is

fi tted in the water inlet pipe
and that it is not clogged up.

2. Connect the water hose to

the water supply by means
of the quick connector (inlet
water, max. pressure: 10 bar,
max. temperature: 40°C).

3. Turn on the water.