Configure wl-520gu/gc under vista os, 1) configuring the device – Asus WL-520GC User Manual

Page 38

WL-520GU/GC Broad Range Wireless Family Router User Manual

Configure WL-520GU/GC under Vista OS

The Windows Simple Config function, which is preinstalled in the ASUS WL-520GU/GC,
enables the device to be configured via WCN Net process of Windows Vista.

Follow the steps below to configure the device using WCN-Net process of Windows Vista:

Note: The WCN Net process of Windows Vista can only discover the deivce when
the device is not configured and is in the default settings state. If the device is con-
figured, you have to set up the device by WEB or EZsetup. Or you can push Reset
button and then begin WCN-NET setup.

1. Connect the device to your PC and power on it.
2. Click Start >Network from the Vista desktop. The Network screen appears (as shown

below).

3. Double click ASUS Wireless Router.

1) Configuring the device

Note: WL-520GC doesn’t support WCN setup but can still works well with Vista PC
by using WEB config or EZSetup.

This manual is related to the following products:

WL-520GU