Asus PCI-L3C920 - Manual (Page 12)

12 ASUS PCI-L3C920 User’s Guide
Connecting to the Network
Follow these steps to connect the card to the network.
NOTE: The RJ-45 port on the network card provides a 10 Mbps or 100 Mbps
connection, depending on the speed of the connected hub or switch.
1. Plug the RJ-45 connector of the twisted-pair network cable into the RJ-45 port
on the card backplate.
2. Connect the other end of the network cable to an active network port.
3. Turn on the PC.
4. Proceed to the next section “Installing the Network Driver.”