Asus TS100-E7 User Manual

Page 46

Chapter 3: Motherboard information

3-6

4. LAN controller setting (3-pin LAN_SW1, LAN_SW2)

These jumpers allow you to enable or disable the onboard Intel

82574L

Gigabit LAN controllers. Set to pins 1-2 to activate the Gigabit LAN feature.

5. Intel

C202 SATA port S/W RAID setting (3-pin RAID_SEL1)

This jumper allows you to select the Serial ATA RAID configuration utility to

use when you create disk arrays. Place the jumper caps on pins 1–2 if you

want to use the LSI Logic Embedded SATA RAID Setup Utility (default);

otherwise, place the jumper caps on pins 2–3 to use the Intel

Rapid Storage

Techonology (IRST).

This manual is related to the following products: