AT&T CL2909 - Manual (Page 29)

Directory
23
Directory operation
Store numbers and names in the directory
Press DIRECTORY, then OPTIONS. The screen
displays ENTER NUMBER.
Enter the telephone number (up to 24 digits)
you want to store.
-OR-
Press REDIAL to store the last number dialed.
NOTE: If the redialed number is longer than
24 digits, you will hear an error tone if you are
lifting the handset while storing the number. The
number cannot be stored.
Press OPTIONS, and the screen displays ENTER
NAME.
Use the
keypad characters chart on page 22
to enter a name (up to 15 characters). Use
CALL LIST to backspace and CALL LIST
to advance or add a space. When you want
to enter two characters in a row that share a
keypad button (for example
M and O), you must
press CALL LIST to move the cursor to the
next position. The screen automatically returns
to idle mode if you do not press the keypad
within 30 seconds.
Press
OPTIONS to store the name and number.
Store a pause or flash in a directory number
Press CALL LIST twice to store a pause in the twice to store a pause in the
dialing sequence ( P displays). Press FLASH to store
a flash in the dialing sequence ( F displays).
NOTE: To exit the directory at any time
without saving changes, press CLEAR.
1.
2.
3.
4.
5.
LOWER
LOWER