Auralex Acoustics AudioTile ShockWave - Manual

Thank you for purchasing pArtScience™ AudioTile™ , the next generation of acoustical treatments from
Auralex ® Acoustics . Varying thickness built into each patent-pending AudioTile delivers excellent broadband
absorption, while tessellated forms allow a unique means of blending absorption, diffusion, and reflection into
custom designs precisely tailored to meet the desired acoustical performance of any room. The result is a room with
a pleasing, well-controlled sound without being perceived as too dry.
Audiotile Features Include:
★ Maximum Broadband Absorption: Absorption coefficient of 0.81 @ 125 Hz. Maximum NRC = 1.00 to 1.05
depending on installation
★ Varying Thicknesses: Foam thicknesses from 1” to 4” are built into each pattern providing varying
degrees of absorption at varying frequencies.
★ Unlimited Tessellation Design Patterns: Allows a unique means of blending absorption,
diffusion and reflection.
★ Easy Installation: Mount using Foamtak™ spray adhesive, Tubetak Pro™ liquid adhesive
and/or Temp•Tabs™ Studiofoam ® mounting kits.
These are general recommendations and installation guidelines for just one of many possible designs you can create from
this box of
AudioTile. To see additional design ideas, visit the AudioTile design gallery at Auralex.com. Should you have any
questions about the installation of your pArtScience AudioTile System, feel free to contact an Auralex Application Specialist
via email at [email protected] or call 1-800-95-WEDGE. For best results, fill out a Personalized Room Analysis Form
(http://www.auralex.com/pcf/) before calling so the application specialist can properly assist you.
Thank you for Purchasing Auralex ® Total Sound Control ® Products
Installation Guidelines
755-1005 | Rev. 1 | 112205 EDL