Auralex Acoustics Roominators Performance Series User Manual

Auralex project roominators kit

Using Tubetak™, mount two (2) LENRD Bass Traps in each vertical
corner. We suggest you install the LENRDs starting at the

ceiling. However, we understand that not all corners are the
same. At the very least, place LENRDs in the upper most
section of the vertical corners. If you have doors, windows
or other obstacles blocking your corners, it is acceptable to
place them in the horizontal, wall/ceiling corners.

Using Tubetak, mount Studiofoam panels
on the front wall, between and behind the

nearfield monitors. The graphic below shows eight
(8) panels across the front wall. The pattern in your
room does not have to be identical, but placement

across this wall is strongly encouraged.

Auralex Project Roominators Kit

Congratulations! You now have a higher quality listening environment.

The

Auralex Project Roominators Kit is designed to reduce uncontrolled ambience in smaller home and project

studios. Proper placement of the

Studiofoam™ panels and LENRD™ Bass Traps will insure greater clarity in your

listening environment. By following these simple instructions, you’ll end up with the best room you’ve never “heard.”

Includes:

8 - LENRD™ Bass T

raps

24 - 2’ x 2’ Studiofoam™ panels

5 - TubeTak™ Adhesives

Roominators Project General Guidelines

For superior acoustics, Auralex suggests mounting LENRD™ Bass
Traps in the corners of your room (for low frequency control) as well
as 2’x2’ Studiofoam™ panels for absorption on the walls and ceiling.
If your room is set up with a mix position against one wall (as many
rooms are), please use the following general guidelines: