AMD SimNow Simulator 4.4.5 - Manual (Page 32)

AMD Confidential
User Manual November 21
st
, 2008
20 Chapter 3: Graphical User Interface
1 simnow> shell.modules
xtrsvc:0
shell:0
Cpu:0
sledgeldt:0
sledgenb:1
sledgenb:0
Cpu:1
Cpu:2
Cpu:3
sledgeldt:1
Cpu:4
Cpu:5
Cpu:6
Cpu:7
Notice the “
shell.modules
” list is flat, but the devices are in a tree structure that allows
us to have both a " -> Machine #1 -> 4 core Node #0 -> AweSim Processor #0 "
and a " -> Machine #1 -> 4 core Node #1 -> AweSim Processor #0 ". Also notice that our default
view ignores the tree, and just shows us two devices: " 4 core Node #0 " and " 4 core
Node #1 ".
3.3.4.2 Enabled vs. Disabled vs. Mixed
Shell device commands like “ shell.Location
” or “
shell.AddDevice
” have generic
meanings (regardless of whether the device is a group or library). But some are defined
from an aggregation of the children. For example, “
shell.GetFastPath
” can return
“Enabled”, “Disabled”, or “Mixed” (means some children are "Enabled" and some are
"Disabled").
1 simnow> shell.GetLogIO "4 core Node #0 -> AweSim Processor #0"
PCI: Disabled
IO: Disabled
IOfpdis: Enabled
MEM: Disabled
MEMfpdis: Enabled
GETMEMPTR: Disabled
1 simnow> shell.GetLogIO "4 core Node #0 -> AweSim Processor #1"
PCI: Disabled
IO: Disabled
IOfpdis: Disabled
MEM: Disabled
MEMfpdis: Disabled
GETMEMPTR: Disabled
In this example, all other child devices of "
4 core Node #0 " are "Disabled" for all log
options.
1 simnow> shell.GetLogIO "4 core Node #0"
PCI: Disabled
IO: Disabled