AT&T CL81201 - Manual (Page 36)

Directory
31
Create directory entries
Create a new directory entry
1. Press
MENU/
SELECT
in idle mode to enter the main menu.
2. Press
MENU
/SELECT to select >Directory.
3. Press q
CID
or p
DIR
to highlight >Add contact.
4. Press
MENU
/SELECT.
5. Use the dialing keys to enter a telephone number (up to 30
digits) when prompted.
Press q
CID
or p
DIR
to move the cursor to the left or right.
Press
MUTE
/DELETE to erase a digit.
Press and hold
MUTE
/DELETE to erase all digits.
Press and hold
REDIAL
/PAUSE to enter a three-second
dialing pause (a p appears).
-OR-
Copy a number from the redial list by pressing
REDIAL/
PAUSE
then q
CID
or p
DIR
, or pressing REDIAL/
PAUSE
repeatedly to locate the number. Press
MENU
/SELECT to copy the number.
6. Press
MENU
/SELECT to move on to the name.
The display shows Number already saved if the number is
already in the directory. You cannot save the same number
twice.
7. Use the dialing keys to enter a name (up to 15 characters)
when prompted. Each time you press a key, the character
on that key appears. Additional key presses produce other
characters on that key. See the chart on the next page.
Press q
CID
or p
DIR
to move the cursor to the left
or right.
Press
0 to add a space.
Press
MUTE
/DELETE to erase a character.
Press and hold
MUTE
/DELETE to erase all characters.
•
•
•
•
•
•
•
•
ENTER NAME
Robert Brown_
Saved
ENTER NUMBER
888-883-2445 _
Review
>Add contact
p
q
>Directory
Caller ID log
p
q
Robert Brown
888-883-2445