AT&T CL81201 - Manual (Page 19)

Telephone settings
14
Handset settings
NOTES:
Your telephone service provider voicemail might alert you to new messages with a stutter (broken)
dial tone. Contact your telephone service provider for more details.
For information about using your voicemail service, contact your telephone service provider.
Rename handset
You can create a handset name for each system handset.
1. When the handset is idle, press MENU/
SELECT.
2. Use q
CID
or p
DIR
to scroll to >Settings, then press
MENU
/SELECT.
3. Use q
CID
or p
DIR
to scroll to >Rename handset, then press
MENU
/SELECT.
4. Change the handset name when prompted.
Press q
CID
or p
DIR
to move the cursor to the left or right.
Use the dialing keys to enter a name (up to 11 characters).
Each time you press a key, a character on that key appears. Additional key
presses produce other characters on that key. See the chart on page 32.
Press
MUTE
/DELETE to backspace and delete characters.
Press and hold
MUTE
/DELETE to delete all characters.
5. Press
MENU
/SELECT to save the setting and return to the previous menu.
There is a confirmation tone.
�ey tone
The handset is set to beep with each key press. You can adjust the key tone
volume or turn it off. If you turn off the key tone, there are no beeps when you
press keys.
1. Press MENU/
SELECT
in idle mode to enter the main menu.
2. Use q
CID
or p
DIR
to scroll to >Settings, then press
MENU
/SELECT.
3. Use q
CID
or p
DIR
to scroll to >�ey tone, then press
MENU
/SELECT.
4. Use q
CID
or p
DIR
to select the desired volume or Off.
5. Press
MENU
/SELECT to save your preference. There is a
confirmation tone and the screen returns to the previous menu.
•
•
•
•
•
•
Clr voicemail
> Rename handset
p
q
RENAME HANDSET
HANDSET____
Rename handset
> Key tone
p
q
KEY TONE
p
q