Axis Communications 207W - Manual (Page 31)

31 AXIS 207W/AXIS 207MW - System Options
Notes:
• An alternative HTTP port can be used/be active even if NAT traversal is disabled. This is useful if e.g. your NAT
router does not support UPnP and you need to manually configure port forwarding in the NAT router.
• If you attempt to manually enter a port that is already in use, another available port will automatically be
selected.
• When the port is automatically selected it will be displayed in this field. This can be changed by entering a
new port number and clicking Save.
FTP
The FTP server running in the AXIS 207W/AXIS 207MW enables the upload of e.g. new
firmware, user applications, etc. Check the box to enable the service.
RTSP
The RTSP protocol allows a connecting client to start an MPEG-4 stream. Check the box to
enable the RTSP server and enter the RTSP port number to use. The default setting is 554.
Note that MPEG-4 streams will not be available if this is not enabled.
Network Traffic
Connection Type - The default setting is Auto-negotiate, which means that the correct
speed is automatically selected. If necessary, you can set the connection speed by selecting
it from the drop-down list.
Maximum bandwidth - To minimize the impact on other services running on your
network, it is possible to configure the maximum network bandwidth the product will be
allowed to use. Specify the maximum bandwidth (in Mbit/s or kbit/s) allowed, or set to
Unlimited.
For more information, please see the online help.